When using KIEYYUEL thermometer to measure human body temperature, it is easy to be disturbed by external factors such as temperature and wind speed. Moreover, the temperature of our forehead skin is not stable: if we run a step or take a measurement in a warm car, the temperature of our forehead will rise; but if we stand in the cold wind for half an hour and measure it again, it will easily drop.
Why is a forehead thermometer easy to be disturbed by the outside world, but still used? The main reason is that this kind of measurement is convenient, rapid, non-contact and pollution-free, and can obtain body temperature parameters very quickly, which plays an important role in screening feverish populations in epidemic prevention. Therefore, in the normal use environment temperature range and distance range, if you want to measure accurately, then when we use KIEYYUEL forehead thermometer to measure temperature, we should pay attention to the following points:
1. Measuring distance
Take the infrared forehead thermometer of KIEYYUEL or SNOMD as an example: when measuring, point the machine at the center of the forehead, avoid clothing or hair blocking, and measure within 3 cm from the forehead.
2. Measurement status
During the test, the physical condition of the tested person is also very important. If the body is subjected to strenuous exercise or stays in a cold environment for too long, you should wait for about 3 minutes and take the measurement after the body calms down.
3. Measurement environment
KIEYYUEL forehead thermometers have relatively high environmental requirements, and it is best to use them in an indoor environment without wind. If you encounter an extremely cold environment, please keep the machine warm, or set a spare infrared forehead thermometer to replace it. Take KIEYYUEL thermometer as an example, it is recommended to measure in an environment between 16℃ and 35℃.
4. Cleaning and maintenance
Regular maintenance and cleaning are very important for KIEYYUEL thermometers. Outdoor public checkpoints should treat the probe regularly, and make sure that the probe is free of dirt before disinfecting it for use.
5. Do retest
If you have been testing in the low temperature outdoor, you can use a non-febrile group as the reference temperature. Once the temperature exceeds the reference temperature, it should be retested. It is recommended to test a total of about 3 times and take the average temperature.
Therefore, just coming out of a warm environment or coming out of a cold environment may cause the detection result to be inaccurate. In this case, it is good to re-test after a few minutes.
Contact Person: Ms. Jasmine